features low cost high forward surge current capability low thermal resistance. high isolation voltage from case to lugs. high temperature soldering guaranteed: 260 /10 second, at 5 lbs. (2.3kg) tension. mechanical data case: molded body terminal: plated 0.25" (6.35mm) lug. polarity: polarity symbols marked on case. mounting: thru hole for #10 screw, 20 in - lbs. torque max weight: 0.84ounce, 24gram maximum ratings and electrical characteristics ratings at 25 ambient temperature unless otherwise specified single phase, half wave, 60hz, resistive or inductive load. for capacitive load derate current by 20% symbols mb5005 mb501 mb502 mb504 mb506 MB508 mb5010 unit v rrm volts maximum rms voltage v rms volts maximum dc blocking voltage v dc volts maximum average forward rectified output current, at t c = 50 (note1, 2) peak forward surge current 8.3ms single half sine - wave superimposed on rated load (jedec method ) rating for fusing (t<8.3ms) i 2 ta 2 s per bridge element at 25a maximum dc reverse current at rated t a = 25 amp dc blocking voltage per element t a
mamp isolation voltage from case to lugs v iso v ac typical thermal resistance (note 1, 2) r jc /w operating temperature range t j storage temperature range t stg 1. unit mounted on 9" x 3.5" x 4.6" (23 x 9 x 11.8cm) al. finned plate. 2. bolt down on heatsink with silicon thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw. (-65 to +150) amps volts (-65 to +150) i r i fsm amps i (av) v f maximum instantaneous forward voltage drop maximum repetitive peak reverse voltage single-phase bridge rectifier mb5005-5010 http:// www.wej.cn e-mail:wej@yongerjia.com wej electronic co. r o hs wej electronic co.,ltd
|